Gigabyte GA 990FXA UD3 is a new motherboard which uses socket AM3 + and support the Bulldozer processor with AMD 990FX chipset and SB950 and plans to be present next month. This motherboard also supports AMD Athlon Phenom II and II. The board is constructed according to the UltraDurable 3 Classic specifications,
with 2 oz copper-layer PCB, 50,000+ hours capacitor durability, and DualBIOS. The socket is wired to four DDR3 DIMM slots supporting dual-channel DDR3-2000 MHz memory with overclocking.
There are four PCI-Express x16 slots on this board, however, only two of them are wired to the AMD 990FX northbridge, both run at full PCI-Express 2.0 x16 bandwidth at all times. The other two are electrical PCI-Express x4, wired to the SB950 southbridge. The board supports both NVIDIA SLI and AMD CrossFireX, though it's likely that it will ship with just the 2-way SLI bridge cable.
Other expansion slots include two PCI-Express x1, and one legacy PCI. All six SATA 6 Gb/s ports from the southbridge are assigned as internal ports, there are two eSATA 3 Gb/s ports, driven by a JMicron JMB363 controller. There are four USB 3.0 ports, two on the rear panel, two via a standard header, driven by Etron EJ168 controllers. Other connectivity includes 8 channel HD audio driven by Realtek ALC889 codec, one gigabit Ethernet connection by Realtek RTL8111E, and FireWire. The board makes use of traditional AwardBIOS, with HybridEFI extensions that lets you boot from volumes bigger than 2.2 terabytes.
Labels:
Motherboard
Previous Article
Responses
0 Respones to "Gigabyte 990FXA-UD3 1.2 Motherboard AMD"
Post a Comment